Aura Gravity Ventilator | 24″ Diameter 4″ Tall Collar AV-24-C04
- Image Gallery
- Drawings & Specs
- Installation Guides
- UL Certificate
- Texas Approval
- Florida Approval
- Shipping Dimensions
Basic dimensions of the Aura Vent and it’s identifying attributes. Primary identifying dimensions of vents and fans are the inside diameter of the Head, which equals the diameter of the hole being vented, and the height of the Collar which is the solid tube between the Head of the vent and the Flange which attaches to the roof.
Louvers are the vertical openings in the vent, which facilitates the flow of air, while keeping animals, insects, debris, and embers out. The combination of inner and outer Louvers on our signature “Aura” series of vents and fans are shaped to create a positive vacuum effect which draws air out of the vent, utilizing a physical principle known as the Venturi effect.
Expected snow and rain in your region and the pitch of the roof are the key consideration when choosing the height of the collar of your roof vents. Zones 1 and 2 are not expected to sustain significant snow packs, while zones 3-7 are likely to experience snow, possibly for weeks or months. Vent collars under 4 inches are inappropriate for flat (0/12 pitch) roofs because even heavy rain can splash water into a shorter vent.
Installation Guides Under Development. Coming Soon.
Active Ventilation Products Aura Vent series has been tested and approved by the State of Florida
|Actual Package Weight||36 lbs|
|Dimensions||30 × 30 × 16 in|
|UPS Dimensional (Billable) Weight||104 lbs|
Active Ventilation Products
Click here for -> Shipping / Delivery - Policies and Procedures
This Aura Gravity Ventilator has 24 inch diameter opening and has a 4 inch tall collar. The AV-24-C04 has 452 inches of net free area (NFA) and comes with a standard 30″ x 30″ square flange.
Aura Gravity Ventilators 16 inch in diameter or larger are considered commercial sized. For those who are looking to ventilate their homes, they are encouraged to view roof vents that are smaller in diameter. Typically vents that are 14 inch in diameter or smaller are recommended.
To install vents for air exhaust the Aura Gravity Vents should be placed on the upper portion (no more than 3 feet down from the peak) of the roof. Roof vents of this size can go on a (2/12 warm climate only) 3/12 to 5/12 pitched roof. For roofs that are pitched at 6/12 or steeper, please notify the sales department when ordering your roof vents. All Aura Vents can be modified so they can be installed on a 12/12 pitch roof.
The Aura Gravity Ventilator works like a roof turbine but with no moving parts.
Aura Gravity ventilators rely on the Venturi Effect (the creation of an upward draft) when wind blows against the outer louvers.
Even the smallest breeze can create exhaust ventilation so that air is drawn out of the gravity vent. This movement of air is proportional to the wind speed, and is measured in cubic feet per minute (CFM). Wind speeds of 11 mph for a 24 inch Aura Gravity Ventilator, produces 1,128 cfm of air exhaust for attic ventilation.
Aura Gravity Vents are UL Listed and rated up to 50+ PSF or wind pressure above 200 MPH. Certified by Texas Department of Insurance, Florida State Approved & Conforms to the Standards of CALFIRE.