skip to Main Content

Air Exhaust Roof Louver | 14″ Diameter 2″ Tall Collar PV-14-C02

Base Price Each: 

$57.00

Click to print or download product brochure

PV-14-C02-brochure
Roof Louver - Pop Vent for Exhaust PV-14-C02

Pop Roof Vent - Installation Instructions

Product LinkInstallation Instructions (Shingled Roof) - pdfInstallation Instructions(Flat Roof) - pdf
PV-14-C02pdf file icon - click to download pdf fileN/A
  • All our aluminum products can be painted with a durable baked-on powder coating surface finish.


    • 0 $
    • 16 $
    • 32 $

    Hover (or tap once) to show color with name, Click (or tap again) to select.


    Hover (or tap once) to show color with name, Click (or tap again) to select.

Pop Vent - Technical Drawing Downloads

Product LinkDrawing- Unmarked
Drawing- Measurements
Drawing- Cutaway
PV-14-C02dwg file icon - click to download CAD (dwg) filepdf file icon - click to download pdf filedwg file icon - click to download CAD (dwg) filepdf file icon - click to download pdf filedwg file icon - click to download CAD (dwg) filepdf file icon - click to download pdf file

Click to download or print Placement Instruction pdf

Click the Logo to see the full documentation of Active Ventilation Products approvals on the Florida DBPR web site.
Florida Approval

Active Ventilation Products Pop Vent series has been tested and approved by the State of Florida

Texas Department of Insurance - Letterhead

Link to TDI Approval Document, from their web site

Texas Department of Insurance - Evaluation Program

Texas Department of Insurance - Pop Vent Chart

Our Pop Vents have UL Certification. Check out other details and specifics on

UL Product IQ™ (Note: UL now requires you to have a free account to access this page)
UL’s Online Certifications Directory.

The Pop Vent “Roof Louver” is used for ventilating steep slope roofs. PV-14-C02 is a 14 inch in diameter roof vent that has a 2 inch tall collar. This means that the vent has a 2 inch clearance between the base and the inner louvers. The PV-14-C02 has 144 inches of net free area (NFA) and comes with a 19 X 19 square base or flange. When used for roof exhaust the PV-14-C02 can be used in climate zones 1 through 8 if the roof pitch is 4/12 or greater and the vent is no more than 18 inches down from the peak of the roof.

Model PV-14-C02 will alleviate moisture in the winter and heat in the summer and extend the life of the roof. The Pop Vent’s top (lid) is manufactured and spun out of one solid piece of aluminum making it corrosion resistant.

The Pop Vents louvers allow hot air to escape freely and efficiently while keeping out birds, insects and animals out of the attic. The round aerodynamic design can with stand harsh weather and wind pressure exceeding 200 mph.

The 14 inch Pop Vent is great for residential roof applications because it is low profile and that it can be painted to match the color of the asphalt shingles.

  • Excellent choice to removing radiant heat from attic spaces in the summer
  • Helps to keep insulation dry in the winter
  • Pitch capacity range: 3/12 to 12/12
  • Inner cylinder louver design does not allow accumulation of particle build up as found in use of insect screen
  • Built-in inner vertical louver cylinder has a 1/8th in. opening between the louver blades meets the requirements of California building code 706A.2 vents to resist the intrusion of burning embers and flame through ventilation openings confirmed by Underwriters Laboratories
  • Helps to reduce energy costs

Pop Vents are UL Listed and rated up to 50+ PSF or wind pressure above 200 MPH.  Certified by Texas Department of Insurance, Florida State Approved & Conforms to the Standards of CALFIRE.

Actual Package Weight 10 lbs
Dimensions 20 × 20 × 10 in
UPS Dimensional (Billable) Weight 29 lbs
Manufacturer

Active Ventilation Products

Click here for -> Shipping / Delivery - Policies and Procedures

Brand: Active VentilationUPC(GTIN): 843951002262 SKU: PV-14-C02 Category: