7-inch Roof Vent | Round Back Static Roof Vent | Model RBV-7-C2
The 7-inch Round Back Static Roof Vent is 7 inches in diameter and has a 2-inch tall collar. The collar provides 2 inches of clearance between the base and the inner louvers. The model RBV-7-C2 has 38 inches of net free area (NFA), meaning each vent will ventilate 158 square feet of attic space.
To determine the number of roof vents you may need, see the Vent Calculator. Each 7-inch static vent has a 12” x 12” square flange.
Where to install:
This 7-inch roof vent is ideal for roofs with a 3/12 to 12/12 pitch. For a pitch of 3/12 or greater, install this vent no more than 2 feet from the roof's ridge. Doing this will enable you to install your static vent in all climate zones.
How it Operates:
The 7-inch static roof vents will work with bathroom fans, range hoods, and attics.
The vented lid is one piece of spun aluminum that prevents rain and snow from entering the attic. The round design is aerodynamic and can withstand wind pressure exceeding 200 mph. All Round Back roof vents are resistant to corrosion and will remain rust-free for the roof's life.
The inner louvers of the roof vent keep insects and animals from entering the attic. The louvers also allow the air to flow freely to the outside.
This 7-inch roof vent is great for residential applications because of its low profile. In addition, these vents can be painted to match the color of asphalt shingle roofs.
If you have any questions, please see the frequently asked questions page. If you still have questions, email the sales team at sales@roofvents.com or call 845-565-7770.
AVP’s Round Back Static Vents are UL-listed, rated up to 50+ PSF or wind pressure above 200 MPH, and certified by the Texas Department of Insurance, & Florida State Approved.
In addition, if you are looking to ventilate a duct, please see the Round Back Roof Jack for vents with a tailpipe adapter. AVP also offers Static Vents with curb mount flanges to go on roof curbs.
