Static Roof Vents
Roof vents and attic vents have many engineering terms used to describe them. One of these terms is a static vent. One may ask the question, why that name? The answer lies in the definition of the word “static”, which is stationary or not moving. Static vents are very popular with architects, engineers and roofers due to the fact that they have no moving parts. Needless to say anything that has no moving parts to wear out will last a long time. This is true in the case of a roof vent or static vent that has no moving parts, the static vent will last the life of the roof. The only time a static vent has to be replaced will be when a there is a re-roofing. The only reason it will need to be replaced is because the flange that gets nailed or screwed to the roof becomes unusable when removed. Between the nails or screws and the roofing sealant, the flange gets all bent up and distorted when removed.
Since the cost is so low for a static vent, it is much easier and economical to just buy a new one and replace the old static vent. Generally speaking all static vents are good vents. All they are is an umbrella over a hole. The challenge has been to make them appealing to the eye and as low a price as possible.